Partition panels, false lining and lamps em Clean room they may not seem like essential items in an executive project, and they can often be overlooked in tighter budgets.
However, for proper project planning of Clean room it is necessary that the layout provides the ideal conditions for the process flow and also for people, within the GMP regulations and standards, considering the required levels of cleanliness.
For safety standards and the segregation of areas that require adequate division, sealing and ventilation between environments, panels and partitions are very important items.
Luminaires are essential for correct lighting in the Clean Room, as every project in this area must have an alternative source of autonomous energy, in addition to being produced with materials that facilitate cleaning and do not allow external contamination of the room.
Partition Panels and False Ceiling for Clean Room
The partition panels for Clean Rooms must be designed considering the entire layout, the pipes and conduits that will be embedded, partitions with internal space can also be developed.
Os partition panels and false ceiling from Asmontec have thermo-acoustic insulation with a core in EPS (Expanded Polystyrene), PUR (Polyurethane), PIR (Polyisocyanurate) or LDR (Rock Wool).
Its coatings can be developed in standard pre-painted steel sheets White Ral 9003 or Stainless Steel AISI 304, with male/female, click or special fitting system.
Clean Room Lighting
As clean room lights they must be built-in or drop-type, made with materials that facilitate cleaning, support the flow of air supplied and pressurized into the environment, in addition to the temperature and humidity of the room.
Developed especially for use in a clean room, meeting the GMP guidelines, the Asmontec luminaires can be developed with Maintenance from Above or Maintenance from Below, luminaire box made of Painted Steel Ral 9003 or Stainless Steel Aisi 304, closing with 4 mm tempered glass lid, fluorescent or LED lamps, 3×1,5 PP cable, plug 3 pins and aluminum deflector.
All materials used in the construction of a Clean Room cannot be particle generators nor favorable to the proliferation of bacteria, at the same time they must be resistant to efforts and impacts, to disinfecting and cleaning agents and to atmospheric corrosion common in these environments. .
To learn more about the products and services in Sala Limpa, look for Asmontec and understand why we have generated trust, credibility and quality for more than 20 years in this segment.
